Power by county

Piatt, IL: data center power outlook

Piatt sits in the MISO market (Midcontinent Independent System Operator); what follows is the screening-grade grid picture for Piatt, Illinois, drawn from public datasets. Counting from the mapped infrastructure, Piatt holds 20 mapped substations and reaches 345 kV. Piatt is covered by 5 retail service territories, including AMEREN ILLINOIS COMPANY, COLES-MOULTRIE ELECTRIC COOP, CORN BELT ENERGY CORPORATION.

Grid position at a glance

Serving utilities
AMEREN ILLINOIS COMPANY, COLES-MOULTRIE ELECTRIC COOP, CORN BELT ENERGY CORPORATION, EASTERN ILLINOIS ELEC COOP, SHELBY ELECTRIC COOP, INC
ISO / market
MISO (Midcontinent Independent System Operator)
Highest grid access
345 kV
Substations in county
20
Industrial retail rate
10.1¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
5 serving utilities: 1.6 to 12.8¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
4 projects, 821 MW
Proposed generation
5 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
982 lb CO2/MWh
Water withdrawals
5.2 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
27,780 employed in construction within ~120 kmA large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Piatt

Below, Piatt in Illinois is described from public data as a starting point for siting diligence. Piatt reaches 345 kV, a high-voltage transmission class, at its strongest mapped point of grid access. With 20 substations mapped, Piatt has a moderate spread of interconnection points.

Piatt falls inside the MISO market (Midcontinent Independent System Operator), which governs how its interconnection requests and capacity move. The rate for Piatt is the 10.1 cents per kWh state industrial average (EIA-861), the same figure the map colours by. Across Piatt, reported per-utility industrial rates cover 5 serving utilities: 1.6 to 12.8¢/kWh, offered only as context beneath the state figure.

Piatt has 4 interconnection-queue projects on record, totalling 821 MW of requested capacity. Piatt has 5 MW of planned or under-construction generation on file in EIA-860M. The balancing authority covering Piatt carries a grid carbon intensity of 981.982 lb CO2 per MWh in eGRID.

Reported freshwater withdrawals for all uses in Piatt are 5.17 million gallons per day in the USGS 2015 compilation, existing demand rather than water free for a new load. Around Piatt, some 27,780 people work in construction within about a 120 km commute (BLS QCEW), a measure of reach, not of available crews.

These numbers for Piatt are screening-grade context for the whole county, drawn from public data with the gaps left visible. Read the figures for Piatt, Illinois together rather than one at a time: grid access matters less without substations near it, and a quiet queue reads differently inside an organized market than outside one. The next step for Piatt, Illinois is an address-level interconnection study; the county figures here only narrow where to look. For Piatt, Illinois, the source log below records where each figure comes from and when it was pulled, keeping the provenance visible.

Sources