Power by county
St. Clair, MI: data center power outlook
St. Clair sits in the MISO market (Midcontinent Independent System Operator); what follows is the screening-grade grid picture for St. Clair, Michigan, drawn from public datasets. Counting from the mapped infrastructure, St. Clair holds 41 mapped substations and reaches 345 kV. St. Clair is covered by 3 retail service territories, including CITY OF CROSWELL - (MI), DTE ELECTRIC COMPANY, THUMB ELECTRIC COOP OF MICH.
Grid position at a glance
- Serving utilities
- CITY OF CROSWELL - (MI), DTE ELECTRIC COMPANY, THUMB ELECTRIC COOP OF MICH
- ISO / market
- MISO (Midcontinent Independent System Operator)
- Highest grid access
- 345 kV
- Substations in county
- 41
- Industrial retail rate
- 8.6¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
- Per-utility rates in county
- 1 of 3 serving utilities: 7.2¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
- Interconnection queue
- 12 projects, 2,950 MW
- Proposed generation
- 96 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
- Grid carbon intensity
- 982 lb CO2/MWh
- Water withdrawals
- 1,380 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
- Construction labor near site
- 95,002 employed in construction within ~120 kmA large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.
Grid conditions in St. Clair
Below, St. Clair in Michigan is described from public data as a starting point for siting diligence. St. Clair reaches 345 kV, a high-voltage transmission class, at its strongest mapped point of grid access. With 41 substations mapped, St. Clair offers interconnection points across many locations.
St. Clair falls inside the MISO market (Midcontinent Independent System Operator), which governs how its interconnection requests and capacity move. The rate for St. Clair is the 8.6 cents per kWh state industrial average (EIA-861), the same figure the map colours by. Across St. Clair, reported per-utility industrial rates cover 1 of 3 serving utilities: 7.2¢/kWh, offered only as context beneath the state figure.
St. Clair has 12 interconnection-queue projects on record, totalling 2,949.97 MW of requested capacity. St. Clair has 95.6 MW of planned or under-construction generation on file in EIA-860M. The balancing authority covering St. Clair carries a grid carbon intensity of 981.982 lb CO2 per MWh in eGRID.
Reported freshwater withdrawals for all uses in St. Clair are 1,379.88 million gallons per day in the USGS 2015 compilation, existing demand rather than water free for a new load. Around St. Clair, some 95,002 people work in construction within about a 120 km commute (BLS QCEW), a measure of reach, not of available crews.
These numbers for St. Clair are screening-grade context for the whole county, drawn from public data with the gaps left visible. Read the figures for St. Clair, Michigan together rather than one at a time: grid access matters less without substations near it, and a quiet queue reads differently inside an organized market than outside one. The next step for St. Clair, Michigan is an address-level interconnection study; the county figures here only narrow where to look. For St. Clair, Michigan, the source log below records where each figure comes from and when it was pulled, keeping the provenance visible.