Power by county

Washington, NE: data center power outlook

The grid around Washington, Nebraska is summarized here from public data, starting from the county's position in the SPP market (Southwest Power Pool). Inside Washington the mapped layer shows 6 mapped substations, with grid access reaching 345 kV at its strongest point. Retail service across Washington is split among 4 utilities, among them BURT COUNTY PUBLIC POWER DIST, HARRISON COUNTY RRL ELEC COOP, MIDAMERICAN ENERGY CO.

Grid position at a glance

Serving utilities
BURT COUNTY PUBLIC POWER DIST, HARRISON COUNTY RRL ELEC COOP, MIDAMERICAN ENERGY CO, OMAHA PUBLIC POWER DISTRICT
ISO / market
SPP (Southwest Power Pool)
Highest grid access
345 kV
Substations in county
6
Industrial retail rate
8.0¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
1 of 4 serving utilities: 7.0¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
None on record
Proposed generation
100 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
872 lb CO2/MWh
Water withdrawals
492 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
54,234 employed in construction within ~120 km (30 of 33 counties reporting)A large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Washington

The sections below set out what public data shows about siting a large electrical load in Washington, Nebraska. At 345 kV, Washington carries high-voltage transmission at its strongest mapped point. Washington contains 6 mapped substations, a moderate footprint spread across the service area.

Wholesale activity over Washington clears through the SPP market (Southwest Power Pool), whose footprint sets how interconnection requests and capacity are handled. Washington carries the state industrial average retail rate of 8.0 cents per kWh from EIA-861, applied statewide. For Washington, the per-utility spread is 1 of 4 serving utilities: 7.0¢/kWh, which qualifies but never replaces the state average.

Washington, Nebraska shows no interconnection-queue project in the covered feeds, whether from real quiet or a feed not yet loaded. In Washington, 100 MW is filed as planned or under construction in the federal EIA-860M inventory. In eGRID, the balancing authority over Washington shows 871.526 lb CO2 per MWh.

For Washington, the USGS 2015 compilation records 492.15 million gallons per day of all-use freshwater withdrawals, not water available to a new load. Washington sits within commuting range of roughly 54,234 construction workers (BLS QCEW, about 120 km), most already committed elsewhere.

Every figure for Washington here is screening-grade and describes the county as a whole, not any single parcel within it. None of the figures for Washington, Nebraska settles a site on its own; each one qualifies the others, and all of them come from public federal and state datasets. Settling a site in Washington, Nebraska requires a study of the specific parcel, a step beyond the county-level picture drawn here. Sources and data dates for Washington, Nebraska are logged directly below, so each figure on this page can be traced back to its public dataset.

Sources