Millard, UT: data center power outlook

Grid position at a glance

Serving utilities

ALAMO POWER DISTRICT NO 3, DIXIE ESCALANTE R E A, INC, FILLMORE CITY CORPORATION, KANOSH TOWN CORPORATION, LINCOLN COUNTY POWER DIST NO 1, MEADOW TOWN CORPORATION, MT WHEELER POWER, INC, PACIFICORP, TOWN OF HOLDEN - (UT), TOWN OF OAK CITY - (UT)

ISO / market

NON_ISO (Not in an organized wholesale market)

Highest grid access

500 kV

Substations in county

27

Industrial retail rate

8.4¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.

Per-utility rates in county

3 of 10 serving utilities: 6.9 to 7.8¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.

Interconnection queue

None on record

Proposed generation

2,076 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.

Grid carbon intensity

1,410 lb CO2/MWh

Water withdrawals

321 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.

Construction labor near site

1,390 employed in construction within ~120 kmA large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Millard

Everything here about Millard, Utah comes from public federal and state records, with the gaps left visible. Millard reaches 500 kV, a high-voltage transmission class, at its strongest mapped point of grid access. With 27 substations mapped, Millard offers interconnection points across many locations.

Because Millard, Utah sits outside an organized market, capacity and interconnection are handled by the utility and bilateral deals, not a market operator. The rate for Millard is the 8.4 cents per kWh state industrial average (EIA-861), the same figure the map colours by. Across Millard, reported per-utility industrial rates cover 3 of 10 serving utilities: 6.9 to 7.8¢/kWh, offered only as context beneath the state figure.

Across the covered feeds, Millard, Utah carries no interconnection-queue project, from either real quiet or a feed not yet loaded. Millard has 2,075.8 MW of planned or under-construction generation on file in EIA-860M. The balancing authority covering Millard carries a grid carbon intensity of 1,410.035 lb CO2 per MWh in eGRID.

Reported freshwater withdrawals for all uses in Millard are 320.79 million gallons per day in the USGS 2015 compilation, existing demand rather than water free for a new load. Around Millard, some 1,390 people work in construction within about a 120 km commute (BLS QCEW), a measure of reach, not of available crews.

These numbers for Millard are screening-grade context for the whole county, drawn from public data with the gaps left visible. Read the figures for Millard, Utah together rather than one at a time: grid access matters less without substations near it, and a quiet queue reads differently inside an organized market than outside one. The next step for Millard, Utah is an address-level interconnection study; the county figures here only narrow where to look. For Millard, Utah, the source log below records where each figure comes from and when it was pulled, keeping the provenance visible.

Sources