Power by county

Kitsap, WA: data center power outlook

Kitsap, Washington is served through an area outside an organized wholesale market, and the figures below describe the public grid around a prospective data center site there. Kitsap carries 53 mapped substations within its boundary, and the highest reachable grid access is 230 kV. Service in Kitsap spans 4 utilities, with BONNEVILLE POWER ADMINISTRATION, PENINSULA LIGHT COMPANY, PUD NO 3 OF MASON COUNTY among those mapped.

Grid position at a glance

Serving utilities
BONNEVILLE POWER ADMINISTRATION, PENINSULA LIGHT COMPANY, PUD NO 3 OF MASON COUNTY, PUGET SOUND ENERGY INC
ISO / market
NON_ISO (Not in an organized wholesale market)
Highest grid access
230 kV
Substations in county
53
Industrial retail rate
6.9¢/kWhState-level EIA-861 industrial average. The map colours by this, not by a per-county rate.
Per-utility rates in county
3 of 4 serving utilities: 1.3 to 7.7¢/kWhLowest to highest industrial rate among the utilities serving this county (EIA-861 Sales to Ultimate Customers). A spread, not the county’s rate, and it covers only the serving utilities that report one.
Interconnection queue
None on record
Proposed generation
170 MW planned or under constructionUnits filed with EIA as planned or under construction (Form EIA-860M). Declared intent from the federal inventory, not the interconnection queue and not guaranteed capacity.
Grid carbon intensity
642 lb CO2/MWh
Water withdrawals
28 Mgal/dAll uses, freshwater. Water already withdrawn locally, not water available for a new load.
Construction labor near site
143,917 employed in construction within ~120 kmA large build needs hundreds of skilled construction workers on site for one to three years. A county with few of them within commuting range means bussing crews in, per diem, and housing, which is real cost and schedule risk. This counts people employed in construction within about a 120 km drive (BLS QCEW), summed across nearby counties. It is not labor known to be available: most are already committed to other projects, and no public data reveals who is free.

Grid conditions in Kitsap

The material below frames Kitsap, Washington for a prospective large load, drawing only on public sources. At 230 kV, Kitsap sits in the transmission class that a large load would look to. The mapped layer packs 53 substations into Kitsap, a dense spread of options.

Kitsap, Washington is not inside an organized market, which leaves interconnection to the utility and bilateral contracts. For Kitsap, the rate shown is the state industrial average of 6.9 cents per kWh (EIA-861), a state figure and not a county-specific one. Beneath that state average, the utilities serving Kitsap that report an industrial rate span 3 of 4 serving utilities: 1.3 to 7.7¢/kWh, shown as context and never as the county rate.

The covered queue feeds list nothing for Kitsap, Washington, which may be quiet or simply uningested. EIA-860M records 170 MW planned or under construction for Kitsap. Kitsap sits under a balancing authority that eGRID puts at 641.69 lb CO2 per MWh.

Kitsap withdrew 27.99 million gallons per day for all uses in the USGS 2015 data, which counts demand, not headroom. About 143,917 people are employed in construction within a 120 km commute of Kitsap (BLS QCEW), which frames staffing distance rather than free labour.

For Kitsap, treat this as screening-grade county context useful for narrowing a search rather than settling a site. Taken together, the figures for Kitsap, Washington describe the grid around a prospective site, drawn from public data with their gaps left visible on purpose. To move past screening in Kitsap, Washington, a specific address needs its own interconnection study, which this page does not attempt. The figures for Kitsap, Washington refresh as their public datasets do, and the exact sources and dates sit in the source log below this section.

Sources